Doç. Dr. Muhammed Aras Özgeçmiş Sayfası

Doç. Dr. Muhammed Aras

Makine Mühendisliği Programı (İngilizce)
muhammedaras[at]baskent.edu.tr
0312 246 66 66 4119

Doktora, (2018), Gazi Üniversitesi, İmalat Mühendisliği

Yüksek Lisans, (2013), Gazi Üniversitesi, Makine Eğitimi

Lisans, (2010), Tabrız Islamıc Azad Unıversıty, Makine Mühendisliği

H-İndeks 4

Yayın Bilgileri


1 Review of Lubrication and Cooling in Computer Numerical Control (CNC) Machine Tools: A Content and Visualization Analysis, Research Hotspots and Gaps, Sustainability, 15(6), 2022 Doç. Dr. Muhammed Aras, Raman Kumar, Shubham Sharma, Ranvijay Kumar, Sanjeev Verma
2 Sustainability Assessment of Energy Storage Technologies Based on Commercialization Viability: MCDM Model, Sustainability, 15(6), 2022 Doç. Dr. Muhammed Aras, Xiaoyang Shu, Raman Kumar, Rajeev Kumar Saha, Nikhil Dev, ?Eljko Stevi?, Shubham Sharma
3 Comparative Evaluation of Coated Carbide and CBN Inserts Performance in Dry Hard-Turning of AISI 4140 Steel Using Taguchi-Based Grey Relation Analysis, Coatings, 13(6), 2022 Doç. Dr. Muhammed Aras, Mustafa Özdemir, Mohammed Al Awadh
4 Machinability Comparison of TiCN-Al2O3-TiN, TiAlN-TiN, and TiAlSiN Coated Carbide Inserts in Turning Hardened AISI 4340 Steel Using Grey-Crow Search Hybrid Optimization, Metals, 13(0), 2022 Doç. Dr. Muhammed Aras, Mohammed Al Awadh, Ramanuj Kumar, Oğur İynen, Mustafa Özdemir, Anish Pandey
5 Investigation on Surface Integrity in Hard Turning of AISI 4140 Steel with SPPP-AlTiSiN Coated Carbide Insert under Nano-MQL, Lubricants, 11(2), 2022 Doç. Dr. Muhammed Aras, Smita Padhan, Naresh Kumar Wagri, Lalatendu Dash, Anshuman Das, Sudhansu Ranjan Das, Priyaranjan Sharma
6 EXPERIMENTAL ASSESSMENT AND TOPSIS OPTIMIZATION OF CUTTING FORCE, SURFACE ROUGHNESS, AND SOUND INTENSITY IN HARD TURNING OF AISI 52100 STEEL, SURFACE REVIEW AND LETTERS, 29(11), 2022 Doç. Dr. Muhammed Aras, Mustafa Özdemir, Abidin Şahinoğlu, Ramanuj Kumar, Sudhansu Ranjan Das
7 Effect of Cutting Parameters on Surface Roughness and Cutting Forces in Hard Turning of 1.2367 Hot Work Tool Steel, Journal of Polytechnic-Politeknik Dergisi, 0(0), 2022 Doç. Dr. Muhammed Aras, Sümeyye Erdem, Mustafa Özdemir, Mehtap Yavuz
8 Analysis and optimisation of the cutting parameters based on machinability factors in turning AISI 4140 steel, CANADIAN METALLURGICAL QUARTERLY, 61(4), 2022 Doç. Dr. Muhammed Aras, Mustafa Özdemir, Abidin Şahinoğlu, Volkan Yilmaz
9 INVESTIGATION OF MACHINABILITY PERFORMANCE IN TURNING OF Ti-6Al-4V ELI ALLOY USING FIREFLY ALGORITHM AND GRNN APPROACHES, SURFACE REVIEW AND LETTERS, 29(6), 2022 Doç. Dr. Muhammed Aras, Ramanuj Kumar, Anish Pandey, Ashok Kumar Sahoo
10 MACHINABILITY INVESTIGATION OF CRYOGENICALLY TREATED HARDENED AISI 4140 ALLOY STEEL USING CBN INSERT UNDER SUSTAINABLE FINISH DRY HARD TURNING, SURFACE REVIEW AND LETTERS, 29(4), 2022 Doç. Dr. Muhammed Aras, Mustafa Özdemir, Anshuman Das, Sudhansu Ranjan Das
11 Effects of shallow cryogenic treatment on surface characteristics and machinability factors in hard turning of AISI 4140 steel, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 236(5), 2022 Doç. Dr. Muhammed Aras
12 The cutting sound effect on the power consumption, surface roughness, and machining force in dry turning of Ti-6Al-4V titanium alloy, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 236(6), 2022 Doç. Dr. Muhammed Aras
13 An investigation on cutting sound effect on power consumption and surface roughness in CBN tool-assisted hard turning, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 236(3), 2022 Doç. Dr. Muhammed Aras, Abidin Şahinoğlu, Ramanuj Kumar
14 Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 236(6), 2022 Doç. Dr. Muhammed Aras, Anshuman Das, Miyaz Kamal, Sudhansu Ranjan Das, Saroj Kumar Patel, Asutosh Panda, Bibhuti Bhushan Biswal
15 Machinability of the AISI M2 High-Speed Steel using CBN Insert, Journal of the Chinese Society of Mechanical Engineers, 42(4), 2021 Doç. Dr. Muhammed Aras, Tuncay Osman Özenç, Mehmet Kaya, Mustafa Özdemir, Hamza Kemal Akyıldız
16 Machinability of Hardened AISI S1 Cold Work Tool Steel using Cubic Boron Nitride, Scientia Iranica, 28(5), 2021 Doç. Dr. Muhammed Aras, Abidin Şahinoglu
17 Comparison of Ceramic and Coated Carbide Inserts Performance in Finish Turning of Hardened AISI 420 Stainless Steel, Journal of Polytechnic-Politeknik Dergisi, 24(3), 2021 Doç. Dr. Muhammed Aras
18 Sustainable Hard Turning of High Chromium AISI D2 Tool Steel Using CBN and Ceramic Inserts, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 74(7), 2021 Doç. Dr. Muhammed Aras, Mustafa Özdemir, Shadi Al Shehabi, Mehmet Tuncay Kaya
19 Investigation of tool wear, surface roughness, sound intensity, and power consumption during hard turning of AISI 4140 steel using multilayer-coated carbide inserts, Journal of Engineering Research, 9(4), 2021 Doç. Dr. Muhammed Aras, Abidin Şahinoğlu
20 Investigation of Vibration, Sound Intensity, Machine Current and Surface Roughness Values of AISI 4140 During Machining on the Lathe, ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 45(2), 2020 Doç. Dr. Muhammed Aras, Abidin Şahinoğlu
21 Turning machinability of alloyed ductile iron compared to forged EN 1.7131 steel, Materials Testing, 62(12), 2020 Doç. Dr. Muhammed Aras, Abidin Şahinoğlu
22 Optimization of cutting parameters with respect to roughness for machining of hardened AISI 1040 steel, Materials Testing, 62(1), 2020 Doç. Dr. Muhammed Aras, Hamed Tanabi
23 Titreşim ve Kesme Kuvveti Esaslı Takım AşınmasınınBulanık Mantıkla İzlenmesi ve Tahmini, JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 20(1), 2017 Doç. Dr. Muhammed Aras, Aydin Salimiasl
24 Talaş Kaldırma İşlemlerinde Takım Durumunun İzlemesi İçin Son Gelişmelerin İncelenmesi, Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 5(1), 2017 Doç. Dr. Muhammed Aras, Aydin Salimiasl
25 Applying a multi sensor system to predict and simulate the tool wear using of artificial neural networks, Scientia Iranica, 24(6), 2017 Doç. Dr. Muhammed Aras, Aydin Salimi Asl, Ayhan Erdem
26 Design of a novel walking assistance device for people with walking disabilities, International Journal of Engineering and Technology, 6(4), 2017 Doç. Dr. Muhammed Aras, Abdulkadir Güllü


1 Machinability of GG25 Gray Cast Iron Using Carbide Inserts, 4th International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD-2023), 21.07.2023 Samet Emre Bilim, Doç. Dr. Muhammed Aras
2 Influence of Turning Parameters on the Radial, Tangential, and Feed Forces during Turning of Ti-6Al-4V Titanium Alloy, 2. International Sciences and Innovation Congress, 22.05.2021 Doç. Dr. Muhammed Aras
3 Design and Fabrication of Automatic Orthognathic Surgery Articulator, 1st International Congress on Engineering Sciences and Multidisciplinary Approaches, 23.02.2021 Doç. Dr. Muhammed Aras, Abdulkadir Güllü
4 Surface roughness prediction during finish hard turning of AISI 420 martensitic stainless steel using ceramic insert, 9th International Scientific Research Congress - Science and Engineering Sciences - (UBAK), 12.12.2020 Doç. Dr. Muhammed Aras
5 Effect of Cutting Parameters on Machinability of Hardened AISI 52100 Bearing Steel, 8th International Symposium on Innovative Technologies in Engineering and Science, 23.10.2020 Doç. Dr. Muhammed Aras
6 The design, analysis and manufacturing a supportive device to walking disabled people, 10th International Conference on Mechatronic Systems and Materials, 07.07.2014 Doç. Dr. Muhammed Aras, Abdulkadir Güllü


Kitap Bölümü Bilgileri
1 Investigation of the relationship between temperature, sound intensity and surface roughness related to tool wear during turning of hardened AISI 4340 material, In:Energy And Environmental Studies For The Near Future, 65-79, Doç. Dr. Muhammed Aras, Abidin Şahinoğlu
2 OPERATING PRINCIPLE OF AUTOMATIC ARTICULATOR, In:Engineering and Technology Management, 348-368, Doç. Dr. Muhammed Aras, Abdulkadir Güllü, Metin Orhan
3 Optimization of machining parameters in turning of AISI 4340 steel, In:Advances in Machinery and Digitization, 29-51, Doç. Dr. Muhammed Aras, Mustafa Özdemir, Ömer Türkcan, Volkan Yılmaz


1 III. İş Fikri Yarışmasında Teşvik Ödülü , 08.10.2015 Gazi Üniversitesi


1 Brandenburg University of Technology/Makine Mühendisliği Doktora Öncesi
2 Perugia University/Makine Mühendisliği Doktora Öncesi


Otomatik Artikülatör Türk Patent ve Marka Kurumu Otomatik Artikülatör


BİLGİSAYAR DES. TASAR. GİRİŞ
BİLGİSAYAR DESTEKLİ TASARIM
BİLGİSAYAR DESTEKLİ TASARIM VE ÜRETİM
BİLGİSAYAR DESTEKLİ TASARIMA GİRİŞ
MAKİNE MÜHENDİSLİĞİNDE ÖZEL KONULAR II
TEKNİK RESİM
ÜRETİM MÜHENDİSLİĞİ
ÜRETİM TEKNOLOJİLERİ

Yayın Bilgileri

Kitap Bölümü Bilgileri

Ortak Yazarlar